Vaporizer News Namaste USA
HOW TO USE A G-PRO
The G pro dried product vaporizer is an amazing portable dried product vaporizer manufactured by Grenco Science, the same manufacturers of the revolutionary and breath taking G Pen and Micro G Pen vaporizers. Prior to the official release of the G pro vaporizer in the USA, The Grenco Science website portrayed this unit as “a technological marvel offering conduction and convection vaping of dried products”.
We could not wait though we had a feeling it might not live up to the hype. We were definitely wrong because the G Pro dried product vaporizer is indeed an amazing vaporizer with a very commendable level of performance while also being very affordable, retailing for less than a $100. Without a doubt, the G pro dried product vaporizer is the easiest vaporizers to use.
With just 5 clicks on the power button and a few temperature adjustment, you are good to go. Quite easy you would say but getting good quality hits from your G pro might involve some intuitive usage procedures and in this article we will be discussing a number of steps on how to use the G Pro dried product vaporizer.
For beginners, after un-boxing your G pro dried product vaporizer with all its accessories in place, ensure that the unit is fully charged and this you can confirm by plugging the charger into a wall socket and a display of a green light depicts a full charge but if a red light surfaces, it implies that the unit is not fully charge. Once this hurdle has been passed, you manually remove the mouth piece by simply applying an upward pressure to either side of the unit.
Once the mouthpiece is taken off, the oven chamber is exposed and then we load the chamber with dried products. Now since the G pro dried product vaporizer operates on a conduction heating method it means that your dried products ought to be finely ground since there is a direct contact with the heating element. We recommend the Aerospaced 4-Piece Grinder to grind your dried products, it is very popular here at Namaste Vapes US.
At this stage you should ensure that the unit still powered off and ensure the chamber Is not over packed with your ground dried products though it should be filled to the top, after which the detached mouthpiece is installed back in position.
With 5 clicks on the power button located on the body of the unit, the G pro is turned on. The G pro features 3 temperature settings- 320˚F, 380˚F, 420˚F which are represented by color red, green and blue respectively. Adjusting this temperature setting would require you to hold down the power button, optimal vaporization of your dried products is attained when there is screen light indication on the power button.
And at this stage the sleeve of the mouth piece is attached and off you go inhaling quality flavors. Note that the initial heat up take 60 -90 seconds and after three minutes of activation, the G pro vaporizer automatically turns off, which means you will have to repeat the process all over for another vaping session.
Cleaning the G pro dried product vaporizer is very paramount to the quality of hits you get out of the unit. It is advisable that one DO NOT use water or cleaning solution on any part of the unit itself. You should first ensure that the unit is turned off and has cooled down and with the aid of the G Cleaning Brush, you clean off any remaining material from inside the stainless steel heating chamber.
You should also ensure to clean the mouth piece, preferably with rubbing alcohol while also cleaning or replacing the removable filter screen.