Mighty Vaporizer - Features
|- The Mighty Vape has mixed heating methods, using both convection and conduction heating.|
|- Impressively powerful cooling unit that prevents hot or harsh vapour hits.|
|- Accurate built-in digital temperature control system that shows set and actual temperatures.|
|- The Mighty Vape has vibration alert when turning on and off.|
|- Automatic shut off ability to conserve power.|
|- High Efficiency Heat Exchanger means this is one of the most efficient Vapes on the market.|
|- Handy Boost Mode.|
Mighty Vape - Technology
- The Mighty blends several cutting-edge thermal engineering features, enhancing the vaporization experience. The Mighty Vaporizer is a dual lithium-ion battery powered portable vaporizer that utilizes full convection hot air combined with conduction, and a high efficiency heat exchanger along with a LED temperature display and precise temperature control. About an inch taller and wider than Crafty, the Mighty vaporizer is almost twice the weight and features double the battery capacity.
- A handy and intuitive vibrating alert reminds you when the chamber is fully heated and ready to produce potent vapor. When you put the Mighty down it will vibrate after a few minutes to notify you of its shut down procedure. You can interrupt the shut down procedure at any time with the touch of a button.
- The boost mode drives the heating system into over-drive producing thick, tasty and powerful vapor. The boost mode can be activated by a setting on the Mighty itself or with the companion smart phone app.
How to use the Mighty Vaporizer
As with any vaporizer the first thing you have to do is sterilize it. To sterilize your device you have to turn it on by pressing the power button (orange button), turn the temperature up to the highest setting and leave it on for around 15-20 minutes. Remember to press the power button occasionally to make sure the device doesn’t auto shut-off. Sterilizing your device is an important step because it removes any trace of contamination left during the manufacturing process.
Get the device ready to vape
You need two things; a grinder and some of your favorite herb. Finely grind your herbs in preparation. To expose the heating chamber, you have to twist the top of the device and remove it. With this is done you’re ready to put your ground herbs into the chamber, making sure you fill the chamber to the top. Put the top back by twisting it on to lock it into place.
Getting the perfect temperature
When your chamber is packed and ready to go, you can set the temperature on the temperature display using the up and down buttons.
With the chamber filled and the temperature set, your device will vibrate to let you know the desired temp has been reached. Now all you have to do is turn around the mouthpiece and inhale.
How to clean the Mighty Vape
Things you need to clean the Mighty
|- Purify cleaning solution|
|- Fresh water|
|- Paper towels|
|- Alcohol solution|
|- Q Tips|
|- Bristle pipe cleaners|
|- Cleaning brush (that comes with the device)|
|- Pokey tool / Toothpick|
Steps to follow to clean the device
|1. Take the cooling unit off the device so the chamber is exposed.|
|2. Take some alcohol solution and pour it in the lid of the bottle.|
|3. Take your Q Tip, dip it into the solution and swab the heating chamber.|
|4. To be safe, turn on the device and let it run through some heating cycles so all the alcohol is burnt off.|
|5. Now slide the logo on the cooling unit to take it apart and remove the mouthpiece.|
|6. Mix some of the purify cleaning solution and the fresh water in a jar.|
|7. Place the three items into the jar with the purify cleaning solution and the fresh water, and leave for 30 minutes to clean.|
|8. Use the bristle pipe cleaner to get to the areas that were missed while in the solution.|
|9. Once that parts are clean you should towel dry them.|
*Remember to use your cleaning brush to clean out after every session just to keep it cleaned and prepped for the next session*
Storz and Bickel also have a Wear and Tear set that consists of:
- New screens
- New cooling unit
- New mouthpieces
- New cleaning brush
- New lower screens
- New higher screens
- New Pokey tools
Click here to check out the Storz and Bickel Wear and Tear set.
Please Note: Next day shipping is not currently available for the Mighty Vaporizer.