Intro to the Pulsar Hand E Nail V3
Pulsar made its name with the Pulsar 7, a complete dry herb vaporizer, and has since expanded its products to just about anything you can think of. One of those products being the Pulsar Hand E Nail V3. This convenient portable rig brings the convenience of a portable device and merges with a dab rig.
The Pulsar E Nail has a sleek design and is the perfect companion to fit in the palm of your hand. With a strong 250mAh battery, it is a convenient battery-powered portable e nail so there’s never a worry about bringing a torch around to use it. The glass bubbler allows the smoke to be filtered out and deliver a cool smooth hit. Along with its carrying case, this vaporizer can be transported anywhere with you.
How To Use The Pulsar Hand E Nail V3?
1. How To Operate The Pulsar Hand E Nail?
Although it can look pretty daunting the Pulsar hand e nail V3 electric rig is a fairly simple device to use. Firstly, put on the bubbler and fill it a little with water before putting on the mouthpiece. Once the mouthpiece is on turn on the device by pressing the single power button 3 times, the light will turn blue when the device is warm and ready.
You can switch between any of the three dishes that are provided, either the ceramic, titanium, or quartz nail. You will need to click 3 more times on the power button to increase the heat and begin heating your selected nail. When this is done a green light will illuminate stating it is ready.
2. How To Get Best Vapor Quality?
Use the included dab nail to put a small amount of concentrate onto the selected nail and allow it to heat up. Make sure you have added water to the glass bubbler so the smoke has something to filter out the chemical, this will allow the smoke to be more purified and smoother.
3. How To Clean It?
There are only a couple of components you will need to clean on this device, the different nails, the bubbler, and the mouthpiece. For the bubbler and mouthpiece because they are glass use a cleaning brush and isopropyl alcohol to clean them out. As for the nails the ceramic and quartz nails can be cleaned with a soaked isopropyl alcohol cotton swab. The titanium nail requires a burn-off session to clean it and should not be cleaned with alcohol.
Pulsar makes great products for every need and the pulsar Hand E nail V3 is no different. Made with a strong plastic shell and a flat wide base the pulsar is sure not to tip over even with the bubbler attached. Pulsar has thought of everything with their e nail as it comes with a solid dab tool that can be attached to the carb cap magnetically. Half of this device is still glass so place it is a safe place when not in use to ensure the glass stays intact.
Temperature settings can be a little trickier on this e rig as there is only a single power button for use. The Pulsar dab rig has a high-temperature range from 650F - 1000F one of the highest you will see in e rigs. When the device first turns on you will want to wait until the temperature reaches the starting point of 650F. You will need to triple-click the button again to raise it to the next level, you can raise it 3 times before it reaches the top temperature.
Battery & Power
The Pulsar hand e nail v3 has a 2500mAh that is sure to last you throughout the day. It is much stronger than the competitors where you may only see 650mAh battery power. When the battery does run out plug it in with the USB charger, it should only take 1 - 1.5 hours to charge completely.
Portability is the name of the game when it comes to this e rig as it comes with its own battery and carrying case this portable electronic dab rig is ready to travel anywhere. No need for torches, Pulsar has made a rig that is just as strong as the stationary glass ones at home.
Who is the Pulsar Hand E-Nail V3 for?
The Pulsar hand dab rig is for those who want to take their dabbing experience with them. It is for the ultimate concentrate user who does not want to stray too far from waxes and oils. It fits nicely into the palm of your hand when in use but is not the most discreet e-nail out there.
Who is the Pulsar Hand E-Nail not for?
The Pulsar hand e nail does have some drawbacks the main one is that there is no precise temperature. The temperature system on the Pulsar hand dab rig has preset temperatures and getting to them can be a challenge in the beginning. This device is not for the user who wants to create their own or have a more precise temperature.
Compare with other products
||Wax & oil
||2500mah lithium-ion battery
|Auto shut off:
||2.75 x 6 x 7 cm
||650°F - 1000°F (343°C-537°C)
The Pulsar Hand E nail v3 comes with a 1-year manufacturer’s warranty on all vaporizer batteries and chargers as well as all defective materials or workmanship.
A great dabbing device, the Pulsar Hand dab rig is easy to use and comfortable in the hand as well as coming with a comfortable mouthpiece. The nails are a nice bonus as choosing from the different ones can change up a session. The water filtration in the new bubbler was a nice upgrade from the previous models and made the smoke easier to inhale.
Pulsar Hand E-Nail V3 Faq's
Q1: Can the bubbler be locked in place?
The bubbler cannot be locked in, it is suctioned onto the top of the device and can get a little wobbly, but is secured on.
Q2: Does the device come apart from the base?
The pulsar hand e nail v3 has a magnetic base that can easily be placed on to stand it up or taken off to carry around.
Q3: How do you switch the nails?
Switching between the included nails is easy as they just screw into the device. Make sure they are cooled off before swapping them out.