Out stock

XVape Avant Vaporizer

See More by XVape


40% OFF
Additional Savings!
Pay only $35.40
When you apply: "NV40" at checkout

You Save: $23.60
Copy Discount Code
Discount Code Copied

Hurry up! Sales Ends In

Hurry! Only 0 Left in Stock!

You're $50.00 from FREE Shipping

Xvape Avant

The Avant Xvape is a dry herb vaporizer crafted from high-quality materials like anodized zirconia and ceramic that preserve flavor, delivering dense clean-tasting hits for an affordable price. This vaporizer has a compact, flat, and discreet design that can be concealed within the palm of your hand for sessions on the go that won't attract unwanted attention.

With impressive features like its 5 different temperature presets, large heating chamber, isolated vapor path, and magnetic mouthpiece, this Xvape device will deliver some of the best vapor you’ve ever experienced.

What is in the box

  • 1x XVAPE Avant Pen
  • 1x Brush
  • 1x USB Cable
  • 1x Packing Tool
  • 4x Screens
  • 1x User Manual 

High-Quality Build

The Avant features an ultra-durable anodized aluminum body with a magnetically connected zirconia mouthpiece and a large ceramic oven. This vape has a small and compact build that can slip effortlessly into any pocket or bag and won’t attract unwanted attention from nosey onlookers.

Temperature presets are all clearly presented at the front of the device with small red lights that let you know what setting you are on. The straightforward and simple design of the Avant not only makes it easy to use but easy to clean and maintain as well. 

5 Temperature Presets

This Xvape vaporizer is equipped with 5 different temperature presets that the user can use during their session within the wide range of 180C-222C. The temperature presets include the following:

  1. 185C (365F)
  2. 190C (374F)
  3. 200C (392F)
  4. 210C (410F)
  5. 220C (428F)

These presets are clearly presented on the front of the device in Fahrenheit and can be cycled through by holding down the power button of the vaporizer.

Battery Life

The Xvape Avant is packed with a 1200mAh battery that provides the user with about 3-5 sessions on a fully charged battery. The battery can be recharged using the provided USB cable and should take about 2-3 hours to reach a complete charge. 

Wide Ceramic Chamber

This vape is designed with a wide ceramic heating chamber, also known as the oven of the device. The wide opening of this chamber allows for a much easier loading process that doesn't result in a mess. The ceramic material used to create this chamber will preserve the flavor of your product for a nice and clean tasting vapor.

How To Use Avant Xvape?

The Xvape Avant has an incredibly simple design that any level user can quickly learn how to use. This entire vape is operated by just one button which makes it easy to get the hang of within just a few uses.

1. How To Operate Avant Xvape

Burn-off Cycle

Before you can start your first sessions with the Avant vape, it is important that you perform a quick burn-off cycle to remove any oils left behind as a result of putting this unit together. 

Turn the device on by pressing the power button on the front of the device 3 times quickly then hold down on the same button to cycle through the temperature presets that are labeled on the front of the device, then set it to the highest preset of 220C. You can allow the vape to run until its auto-shut-off feature kicks in after 3.5 minutes. The Avant is now sterilized and ready for use.


Allow the vape some time to cool down before loading any herb into the chamber. As it cools down you can focus on breaking down your herb to a fine consistency using any grinder. Load the herbs firmly into the chamber and avoid packing too tightly. You can then replace the mouthpiece and turn on the device again.

Choosing a Temperature 

Hold down the power button to cycle through and set one of the 5 temperature presets for this session. As a quick rule of thumb, lower temperatures tend to deliver better-tasting vapor while higher temperatures result in denser clouds. 

Heat Up

When you’ve made a selection, the device will take about 35 seconds to reach your desired temperature. Once it reaches the preset you have chosen, you can begin taking long slow draws from the mouthpiece. 

2. How To Get Best Vapor Quality

For optimal performance, start your session out with a fully charged battery. Simply plug your Avant into the USB cable and allow up to 3 hours for it to charge if the battery was on empty.

When prepping for a vape session, make sure that your herbs have been properly ground up to a fine consistency. This is due to the fact that this is a conduction-styled vaporizer. This means it relies on the material coming into direct contact with the heating element which in this case are the walls of the oven. 

A fine grind will ensure more even vaporization of the contents within the chamber. Make sure to avoid grinding your herbs too fine or you can risk pieces clogging up the unit. Pack this ground material firmly but not too tightly into the oven. 

After every session, make sure that you are brushing the spent material out of the heating chamber and performing deeper cleanings every few weeks so that residue and gunk do not build up on this device and affect the functionality. Lastly, stick with using herb that is fresh but properly dried for the best quality of vapor. 

3. How To Clean/Maintain It

To perform a deep cleaning on the Avant vaporizer, you’ll want to first ensure that the unit has fully cooled down from your last session. Once cool, get started by removing the mouthpiece at the top of the device and submerging it into a container of isopropyl alcohol to soak for about 30 minutes. 

As for the heating chamber, use the provided brush to clean out any debris. Take a cotton swab that has been gently dipped in isopropyl alcohol and use it to scrub around the inside of the oven removing all residue. 

Remove the Xvape Avant mouthpiece from the container of isopropyl alcohol and rinse it well under warm water. Dry it off completely then reassemble on the top of the unit. 

After cleaning, it is best to perform a burn-off cycle to remove any alcohol residue left inside. Do this by turning on the device, setting it to the highest temperature of 230C, and letting it run until the auto-shut-off feature kicks in. The Avant is clean and ready for another session!

Tech Specs 

Compatible with:

Dry herbs

Heating system


Chamber Capacity

0.3 grams

Battery length

3-5 sessions

Charging time

2-3 hours

Auto shut off:

3.5 min




98 x 33 x 18 mm

Temperature settings

5 presets

Who is the Avant Xvape for?

This vaporizer is designed for dry herb fans who are always on the go and need a device that won’t turn heads during an outdoor session. The small and compact build of the Avant makes it easy to conceal in any pocket, bag, or even the palm of your hand.

The simplicity of the Avant Xvape is also great for beginners searching for the perfect entryway into the world of vaping.

XVape Avant Vaporizer

XVape Avant Vaporizer